Husky Pump (D32255)
Converts any dry blast machine to wet blast when used in conjunction with a Win Nozzle or WB1 wet head attachment.
Our Husky Pump is a reliable air driven diaphragm pump, giving consistent and low maintenance operation. The pump inlet can take water from a container via the suction hose and feeds this through to the wet blast attachment under pressure.
Part ID | Description |
|---|---|
112933 | MUFFLER (HUSKY 307 AIR PUMP) |
240369 | HUSKY/PRO STAND UNIT |
D31255 | ‘HUSKY’ 307 DIAPH. PUMP |
D31331 | HUSKY 307 AC SS SS TF |
D32255 | ‘HUSKY’ 307 DIAPH. PUMP |
D54331 | HUSKY 716 S/S DIAPHRAGM PUMP |
DO3255 | REPAIR KIT FOR ‘HUSKY’ PUMP |
Two kits are available:
D32255A – with 10m water hose
D32255B – with 20m water hose
WIN nozzles are used in conjunction with a Husky Pump for atomised water vapour blasting. Our WIN nozzles allow water to enter the airstream at the nozzle exit. The water flow can be regulated very accurately by the adjustment tap, from a constant stream to a fine vapour. This minimises the amount of water needed to capture the airborne dust. Nozzles available in ¼”, 5/16″, 3/8″, 7/16″ and ½” bore sizes.
Part ID | Description |
|---|---|
WIN450 | NOZZLE – WIN NOZZLE 1/4″ |
WIN550 | NOZZLE – WIN NOZZLE 5/16″ |
WIN650 | NOZZLE – WATER INDUCTION 3/8″ |
WIN750 | NOZZLE – WIN NOZZLE 7/16″ |
WIN850 | NOZZLE – WIN NOZZLE 1/2″ |
WINVK | WATERHOSE AND TAP FOR WIN NOZZLES |
Our wet blast heads are designed to convert standard nozzle holders into a wet blast attachment. Our low cost WB1 head clamps to the outside of the nozzle and takes water from mains pressure.
Part ID | Description |
|---|---|
WB1 | CLEMCO WETBLAST HEAD |
