Deadman Lines
Colour coded 1/4″ (6mm) air lines are essential components for safe blasting systems and provide easier identification of lines carrying air for dead man operation, abrasive control and breathing air etc.
Air Lines | ||
|---|---|---|
HOSE7C | 1/4″ x 34ft(10m) | Blue |
HOSE7CR | 1/4″ x 34ft(10m) | Red |
HOSE7CY | 1/4″ x 34ft(10m) | Yellow |
HOSE7D | 1/4″ x 68ft(20m) | Blue |
HOSEDR | 1/4″ x 68ft(20m) | Red |
HOSE7DY | 1/4″ x 68ft(20m) | Yellow |
This valve is an air saving version option for a deadmans handle. The air circuit is normally closed and is only activated when the handle is depressed.
“The blasters favourite”, widely used throughout the industry. This safety trigger is recognised as the best for site blasting conditions. (Supplied as RCAMV6 for remote control abrasive valve).
The RCAMV6 Deadman Handle is specifically for use with pneumatic abrasive metering valves. The RM88 Slide valve kit enables the operator to switch abrasive on and off at the nozzle for blow-down or wash-down purposes.
